Chapter 3: operation – I-View FDMO-36XIR/27XIR/22XIR/18XIR Outdoor IR Speed Dome Camera User Manual
Page 32
Advertising
![background image](/manuals/322149/32/background.png)
32
Chapter 3: Operation
6.
<PATTERN EDIT>
<PATTERN EDIT>
A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be
recalled with a command from a controller or automatically by a programmed function.
RECORD
User can record pattern for the dome, <OPEN> to start recording, when start recording, use
joystick to move the viewing position as the pattern record, when finish select <CLOSE> to
end recording, <CLOSE> again to exit.
RUN
Dome will run the pattern which you have been recorded.
PATTERN EDIT
→ RECODE
RUN
BACK
EXIT
CAMERA SETUP
CAMERA SETUP
MOTION SETUP
TITLE EDIT
TOUR EDIT
SCAN EDIT
PATTERN EDIT
MASK EDIT
POWER ON:SCAN
BACK
EXIT
Advertising
This manual is related to the following products: