MoTeC ADL3 EDL3 - Manual (Page 19)

MoTeC Configuration
15
Configuration
All aspects of the ADL3 can be configured including, which sensor is
connected to which input, the calibration of each sensor, what to display and
where to display it, what to log and how fast to log it, tacho range, warning
alarms, multi stage shift lights, etc.
The configuration is stored in a configuration file on the PC. When starting
ADL3 Dash Manager the menu items related to changing the configuration
are unavailable. To make them available, load a configuration file either by
opening an existing file or by creating a new one.
All changes to the ADL3 configuration are performed ‘Offline’, i.e. without the
PC communicating with the ADL3. The changes are saved in the
configuration file on the PC. The file must be sent to the ADL3 before the
changes take effect. See Operation.
Tip: When using a laptop in and around a car, it is often not practical to use a
mouse to navigate through the program. Using the keyboard to select options
is easier. An overview is given in Windows Keyboard Shortcuts.
Configuration File
From the File menu the following option are available:
• New creates a new configuration based on a predefined template.
• Open selects an existing file.
Right-click the configuration file to Rename, Delete, Send to a disk etc.
• Save after a new configuration has been defined, it should be saved with
a meaningful name.
• Save as can be used to create a copy of an existing configuration file by
giving it a new name.
• Edit Details allows for entering event, venue and vehicle details to be
stored with the configuration file.
• Check Channels verifies that all channels are correctly generated.
• Edit Configuration Comments allows for other comments to be stored with
the configuration file.
• View Configuration Summary gives a quick overview of the configuration
file.
• Convert Logging Image allows users to manually convert a log file for use
in i2.
• Exit exits the program.