MoTeC ADL3 EDL3 - Manual (Page 30)

26 Configuration
Track Map Sensor Requirements
In order for the i2 Data Analysis software to plot a track map the following
sensors are required and must be logged.
• Lateral G force (internal sensor)
• Wheel
Speed
• Lap Beacon (the ‘Beacon’ Channel must be logged)
• Optionally
Longitudinal G force (internal sensor)
A Longitudinal G force sensor should be used if the vehicle has only one
wheel speed sensor. This allows the analysis software to eliminate wheel
lockups which is essential when creating or using a track map.