MoTeC ADL3 EDL3 - Manual (Page 31)

MoTeC Configuration
27
Display
The ADL3 display is a high contrast, high temperature, custom made LCD
display.
The display contains a Bar Graph, three Numeric Displays, a Centre Numeric
Display and a Bottom Alpha / Numeric Display.
To configure the display
• On
the Functions menu, click Display
• Select the relevant tabs to set up the display
Refer to ADL3 Dash Manager online help for additional information.
Display Modes
The display has three main modes of operation; Race, Practice and Warm-up.
The mode is changed by pressing a button that is wired to the system.
Race Mode
The Race display is normally used to display minimal information, e.g.
RPM, Lap Time, Fuel Remaining or Laps Remaining.
The bottom alpha / numeric display can be used to display additional
information as needed.
Practice Mode
The Practice display is used to display basic information, plus information
to help the driver improve lap times, e.g. Lap Time, Lap Gain / Loss,
Maximum Straight Speed, Minimum Corner Speed or Corner Exit Speed.