MoTeC ADL3 EDL3 - Manual (Page 34)

30 Configuration
Bottom Alpha / Numeric Display
The 13 digit bottom alpha / numeric display can display up to 20 lines of
information that can be scrolled up or down using external buttons. Each of
the 20 lines can display up to 3 channel values at a time.
The values shown may be different for each of the three display modes.
Similar to the numeric displays, the bottom alpha / numeric display can show
up to four override values.
The bottom alpha / numeric display will also show any active alarm
messages, which will override all other values until the alarm is cleared.
Display Formatting
• Units
All display units can be changed to suit the driver preferences, for example
show temperatures in Fahrenheit rather than in Celsius.
Note: This is independent of the units used for other purposes.
• Decimal
Places
The number of decimal places can be reduced for display purposes, for
example the engine temperature is measured to 0.1
°C but is better
displayed with no decimal places. This is normally done automatically.