MoTeC ADL3 EDL3 - Manual (Page 5)

MoTeC Introduction
1
Introduction
ADL3 - Advanced Dash Logger
The ADL3 is a combined display, fully programmable data logger and
powerful control device, all in one lightweight unit. The screen layout is fully
configurable to display a multitude of data channels, warning alarms, lap
times, fuel calculations, minimum corner speeds, maximum straight speeds
and more. The ADL3 performs calculations, acquiring data from other MoTeC
devices such as an ECU, Dash Logger and several VIM input modules, which
enable it to log more than 300 inputs.
EDL3 - Enclosed Dash Logger
The EDL3 is based on the ADL3, supplied in a fully enclosed case. This
provides the flexibility to connect a display suitable for your application or to
use it as a 'black box' type data logger.
It functions in the same way and uses the same software as the ADL3. In the
remainder of this document when reference is made to the ADL3, it also
applies to the EDL3 – except when referring to the display.
Features
Both ADL3 and EDL3 come with a range of features as standard and several
options available as upgrades to customise and grow your system. These
additional features are activated through a simple password acquired from
MoTeC, at any time when you need it. See ADL3 Upgrades
General
• All-in-one
display, logger and controller eliminates the need for separate
devices
• Suitable for bikes, cars, marine and industrial applications
• Compact, durable and reliable unit
• Supports wideband Lambda from PLMs or LTCs, using Bosch LSU or NTK
UEGO 5 wire sensors
• Straightforward control for lights, fans, pumps and PID controlled devices
• More than 300 sensor inputs, using several VIM expanders
• Easily integrated with MoTeC CAN based devices e.g. expanders, lap
timing devices, shift lights and ECUs