Leveling the outrigger wheels – Castle Equalizer Edgebander User Manual
Page 20
Adjust for the width of the tape with the screw on the front of the Mechanical
Channel. It has a spring under its head.
This should also be adjusted until the tape has a slight drag. The spring keeps the
adjustment from changing with use.
Leveling the Outrigger Wheels
Each Outrigger Wheel can be independently leveled.
Loosen the two bolts that hold the Wheel Cage to the Arm
Loosen these to the point that the Wheel Cage moves in its mountings, but has enough
resistance to stay in place when repositioned.
Repeat these steps with each of the Wheels on that particular Arm until they are all
slightly loose.
Place a level (or any true flat surface that is long enough), across the Rollers in the
main body and outward over the Outrigger Wheels.
In this way each Wheel can be positioned to “just touch” the leveling surface.
18