Castle Equalizer Edgebander - Manual (Page 22)

Band Guide:
These stainless steel guides ensure that the tape stays centered
on the board. They are adjustable for both thickness and width.
The thickness is adjusted with the Philips head bolt to the left of
the Transfer Wheel as it goes through the main Front Panel.
The width is adjusted with the Phillips head screw pictured.
Outriggers:
Should be used when longer panels are being banded. They are
simply inserted until they run into the stop bolts inside the
Mechanical Channel. When not in use, the Outriggers can be
stored on the legs of the Equalizer.
Sprung Wheels:
Four of the iron wheels after the Glue Transfer Wheel are spring
loaded to help seal the edges of the banding in place. When
using the Equalizer, hold the panels down firmly to insure that
the wheels are compressed to provide a finished edge on the
banding.
20