Castle Equalizer Edgebander - Manual (Page 5)

Setting Up Your Equalizer
ƒ Begin unpacking your machine by removing and discarding the cardboard and wood skid
materials.
ƒ Loosen the leg locknut and then the set screw on one side of the machine and raise the
Equalizer to the working height of your choice. It may be easier to do this incrementally,
first one side then the other.
ƒ There is a retaining bolt inside the legs so that they will not fall out during this adjustment.
ƒ Tighten the set screw to hold the chosen height, and then set the angle by pushing the top of
the machine towards the rear of the machine, and then tighten with the jamb nut.
3