Climax KM4000 KEY MILL - Manual (Page 3)

Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 3
DiMenSionS, Setup & operation
Lateral travel
2.0 (50.8)
9.0 (228.6)
11.5 (292.1)
14.0 (355.6)
16.0 (406.4)
Dimensions in inch (mm)
Set-up and Operation
Insert the end mill in the spindle of the KM4000 Portable Key Mill,
and clamp it on that shaft - it’s that simple. On a straight shaft, an
experienced operator can mount the machine and be ready to cut
a new keyway in less than 15 minutes! Shimming to tapered
shafts may take a little longer.
The 2.0 inch (50.8 mm) lateral travel of the KM4000 allows you to
cut wide keyways or slots with a less expensive, smaller end mill.
The calibrated cross slide is positioned with the hand crank.
13.25
(336.6)
2.12
(53.8)
Longitudinal travel:
7.88 (200.2)
Vertical travel:
3.0 (76.2)
3.4
(86.4)
6.0
(152.4)
18.5 (469.9)
24.5 (622.3)
4.55 (115.6)
0.305 - 3.305
7.747 - 83.947