Climax KM4000 KEY MILL - Manual (Page 6)

Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 6
ApplicAtions
Mounting applications include:
Mounting on end of shaft
Needs only 8.5 inches (215.9 mm) of shaft for clamping, or only 10.5 inches (266.7 mm) of shaft for clamping from an obstruction.
(NOTE: The KM4000 can cut keyways within 2.2 inches (55.88 mm) of the obstruction)
Mount in the middle
The machine can be leveled for cutting long keyways.
tapered shafts
Mounting on tapered shafts requires shimming
the KM4000 is widely used by these industries:
• Construction
• Bridge building & repair
• Power Generation
• Ship building
• Pulp and paper
• Steel and aluminum
typical applications:
• Keyways on tapered shafts
• Milling stress relief pockets on bridge decks
• Cut motor mount slots in plate or
I-beams
• Cut inspection windows in vessels
• Cut keyways on motors