Climax KM3000 KEY MILL - Manual (Page 4)

TOOL CONFIGURATIONS
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 4
No. Description
KM3000 Portable Key Mill, Electric
Standard key mill Model KM3000 complete with 1 Hp (0.75 kW)
electric motor, instruction manual, tool kit, and bar clamp. Order
collets and end mills separately. Shipped in wooden crate.
37000 KM3000, inch 120V with Speed Control
As above with inch calibration and 120 V motor, inch spindle, and
electric speed control.
16000 KM3000, inch 120 V with no speed control
As above with inch calibration and 120 V MOTOR, in-line switch and
standard U.S. cord set.
16001 KM3000, inch 230V with speed control, CE Compliant
As above with inch calibration and 230 V motor, inch spindle and
electric speed control.
16003 KM3000, metric 120V with no speed control
As above with metric calibration and 120 V motor, metric spindle,
inline switch and standard U.S. Cord set.
16004 KM3000, metric 230V with speed control, CE Compliant
As above with metric calibration and 230 V motor, metric spindle,
and electric speed control.
39572 KM3000, metric 120V with Speed Control
As above with metric calibration and 120 V motor, metric spindle,
and electronic speed control.
36783 KM3000, metric 120V with Speed Control, CE Compliant
As above with metric calibration and 120 V motor, metric spindle,
and electronic speed control.
39571 KM3000, metric 230V with no Speed Control, CE-Compliant
As above with metric calibration and 230 V motor, metric spindle,
and no speed control.
KM3000 Portable Key Mill, Pneumatic (with pneumatic
conditioning unit), all CE-Compliant
Standard key mill Model KM3000 complete with 1.2 Hp (0.89 kW)
pneumatic motor*, instruction manual, tool kit, and bar clamp.
Order collets and end mills separately. Shipped in wooden crate.
16002 KM3000, pneumatic, inch
As above with inch calibration.
16005 KM3000, pneumatic, metric
As above with metric calibration.
*Motor requires 40 ft3/min (1 m3/min) at 90 psi (620 kPa).
10378 Chain clamp assembly
Chain, clamping blocks and bolts for attaching key mill to shafts up
to 10.5 inch (266.7 mm) diameters. Net weight 7 lb (3.2 kg).
10381 Cross milling adapter
Allows key mill to be clamped 90 degrees to shaft axis.
Net weight 7.l8 lb (3.5 kg).
11669 Shim kit
Shims fit inside V- base to enable key mill to be mounted to shafts
with diameters as small as 0.7 inch (19.1 mm). Net weight 3.4 lb (1.6 kg).
NOTE: Drawings are for reference only, are not to scale, and
may not represent actual product.