Climax KM3000 KEY MILL - Manual (Page 5)

TOOL CONFIGURATIONS
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 5
No. Description
KM3000 Portable Key Mill, Hydraulic*, all CE-Compliant
Standard key mill Model KM3000 complete with instruction manual, tool
kit, and bar clamp. Order collets and end mills separately.
Shipped in wooden crate.
16008 KM3000, inch hydraulic 274 rpm
As above with inch calibration and hydraulic motor producing 274 spindle
rpm at 6 gal/min (22.3 liter/min).
16009 KM3000, inch hydraulic 430 rpm
As above with inch calibration and hydraulic motor producing 430 spindle
rpm at 6 gal/min (22.3 liter/min).
45134 KM3000, metric hydraulic 430 rpm
As above with metric calibration and hydraulic motor producing 430
spindle rpm at 6 gal/min (22.3 liter/min).
16010 KM3000, hydraulic 664 rpm
As above with inch calibration and hydraulic motor producing 664 spindle
rpm at 6 gal/min (22.3 liter/min).
*Hydraulic power unit sold separately.
37388 KM3000 inline switch 120V
Provides on/off control of the KM3000 motor. No variable speed. Used
when variable speed is not required. Fits current generation of KM motors
only, not older models. Has standard NEMA 5-15 straight blade plug with
ground. Overall length is 96 inches (244cm).
37389 KM3000 inline switch 230V, CE-Compliant
Provides on/off control of the KM3000 motor. No variable speed. Used
when variable speed is not required. Fits current generation of KM motors
only, not older models. Has european Schuko style plug. Overall length is
244 cm (96 inches).
36549 KM3000 speed control assembly 120V
Provides on/off and variable speed of the KM3000 motor. Fits current
generation of KM motors only, not older models. Has standard NEMA 5-15
straight blade plug with ground.
36685 KM3000 speed control assembly 230V, CE-Compliant
Provides on/off and variable speed of the KM3000 motor. Fits current generation
of KM motors only, not older models. Has european Schuko style plug.
36950 KM3000 speed control assembly and retrofit kit
Provides on/off and variable speed of the KM3000 motor. Includes 36549
speed control assembly and a new end cap assembly (34142) for the
motor so that older machines can use the current design controller. Has
standard NEMA 5-15 straight blade plug with ground.
End mill sets
SAE and metric 2-flute end mills are available. Short flutes for maximum
rigidity. See separate end mill price list for availability.
10385 End mill set, inch
Seven end mills from 1 /
4
- 1 inch in 1 /
8
inch increments, plus collet.
10386 End mill set, inch
8 end mills from 3 /
16
- 1 inch in 1 /
16
inch increments, and 7 end mills from
1 /
4
- 1 inch in 1 /
8
inch increment, plus 3 /
8
inch I.D. collet for end mills 7 /
16
inch and smaller.
10387 End mill set, metric
Five end mills: 8 mm, 10 mm, 12 mm, 16 mm, and 18 mm, plus two collets,
one with 16mm OD with 10mm ID, the other with 16mm OD and 12mm ID.
22387 End mill set, metric
Eight end mills: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm,16 mm,
18 mm, plus three collets.
36549 shown
NOTE: Drawings are for reference only, are
not to scale, and may not represent actual
product.