Climax LM6000 OBS LINEAR/GANTRY MILL - Manual (Page 7)

Tool Configuration Tool Configuration
Climax Portable Machine Tools, Inc. 2712 E. Second Street, Newberg, OR 97132 USA Web site: www.cpmt.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 7
Z-Axis Feed Assembly
Manual Feed 47219
Electric Feed Assembly, 120V 53226
with 20 ft (609.6 cm) cables
Electric Feed Assembly, 120V 53227
with 50 ft (1524.0 cm) cables
Electric Feed Assembly, 120V 53228
with 100 ft (3048.0 cm) cables
Electric Feed Assembly, 230V with 20 ft 53229*
(609.6 cm) cables (not for use w/ Climax HPU)
Electric Feed Assembly, 230V with 50 ft 53231*
(1524.0 cm) cables (not for use w/ Climax HPU)
Electric Feed Assembly, 230V with 100 ft 53232*
(3048.0 cm) cables (not for use w/ Climax HPU)
* Order 230V stand-alone controls
6 Stand-Alone Feed Controls
(Not needed if using a Climax Hydraulic Power Unit)
Stand-alone feed control & pendant, 120V 53398
with 20 ft (609.6 cm) cables
Stand-alone feed control & pendant, 120V 53399
with 50 ft (1524.0 cm) cables
Stand-alone feed control & pendant, 120V 53400
with 100 ft (3048.0 cm) cables
Stand-alone feed control & pendant, 230V 53401
with 20 ft (609.6 cm) cables
Stand-alone feed control & pendant, 230V 53402
with 50 ft (1524.0 cm) cables
Stand-alone feed control & pendant, 230V 53403
with 100 ft (3048.0 cm) cables
7 Risers
1 inch (25.4 mm) riser assembly 46508
2 inch (50.8 mm) riser assembly 46510
4 inch (101.6 mm) riser assembly 53751
6 inch (152.4 mm) riser assembly 53752
8 inch (203.2 mm) riser assembly 53753
8 Milling Head Swivel Attachment
Optional milling head swivel attachment mounts 53620
between milling head & Ram saddle plate,
allowing milling head to rotate 360º.
Lockable in any position. Please call for details.
9 Digital Read Out
2-Axis Digital Read Out with Swivel Mount 53353
3-Axis Digital Read Out with Swivel Mount 53355
Z-Axis Digital Scale 51863
X-Axis Digital Read Out
(required with DrO)
DRO Scale Tape and Encoder Assembly 48” Bed 53356
DRO Scale Tape and Encoder Assembly 72” Bed 53357
DRO Scale Tape and Encoder Assembly 96” Bed 53358
DRO Scale Tape and Encoder Assembly 120” Bed 53359
DRO Scale Tape and Encoder Assembly 144” Bed 53360
Y-Axis Digital Read Out
(required with DrO)
DRO Scale Tape and Encoder Assembly 24” Ram 53361
DRO Scale Tape and Encoder Assembly 36” Ram 53362
DRO Scale Tape and Encoder Assembly 48” Ram 53363
Z-Axis Digital Read Out
DRO Scale 8” Stroke Milling Head (for 24” rams) 53364
DRO Scale 8” Stroke Milling Head (for 36” rams) 58581
DRO Scale 8” Stroke Milling Head (for 48” rams) 58582
Test Data
All test cuts performed with a 25Hp (18.6 KW) HPU and a 17.9 cu. in. (293.3 cu. cm) hydraulic motor in A-36 steel
Orientation Cutter Diameter No. of Inserts Width of Cut Depth of Cut Feed Rate
Vertical (up) 8.0 (203.2) 8 8.0 (203.2) 0.05 (1.27) 5.1 (129.5)/min.
Vertical (up) 8.0 (203.2) 8 7.0 (177.8) 0.10 (2.54) 4.4 (111.8)/min.
Horizontal 8.0 (203.2) 8 5.5 (139.7) 0.10 (2.54) 18.0 (457.2)/min.
Horizontal 8.0 (203.2) 8 8.0 (203.2) 0.10 (2.54) 10.0 (254.0)/min.
Horizontal 5.0 (127.0) 6 3.5 (88.9) 0.10 (2.54) 20.0 (508.0)/min.
Horizontal 5.0 (127.0) 6 5.0 (127.0) 0.10 (2.54) 20.0 (508.0)/min.
Horizontal 5.0 (127.0) 6 5.0 (127.0) 0.15 (3.81) 12.0 (304.8)/min.
Flatness
(Machine setup & flatness measurements performed with a Hamar laser)
Cutter Diameter No. of Inserts Material Area Total Flatness
8.0 (203.2) 8 A-36 Steel Plate
16.0 x 72.0
(406.4 x 1828.8)
0.0036
(0.091)
Metal Removal Rates
Continuous Intermittent Metal Removed Per Hour
7.0 cubic inch
(114.8 cubic cm)
per minute
10.0 cubic inch
(163.9 cubic cm)
per minute
420 cubic inches = 119lbs (54.0kg) steel/hour
600 cubic inches = 170lbs (77.1kg) steel/hour