Climax VM2600 GLOBE VALVE FLAT SEAT GRINDING & LAPPING - Manual (Page 4)

Feb-06 / VM2350-2500-2600 Globe Valve Machine Brochure Page 4 of 8
Model VM2350 (Seat Diameter Range: 3“-14“(80 mm-350 mm))
P/N Description
Globe Valve Grinder VM2350S
Nominal working diameter 3“ to 14“ (80 mm to 350 mm)
Submerging depth 24“ (600 mm).
Included Components:
•
3 sets of planet arms (5 arms/set) 1.2”(30 mm), 2.4”(60
mm), 4.5”(115 mm) in length
•
Set of 3 planet wheels 3.9” (100 mm), 5.3” (135 mm),
8.7” (220 mm) in diameter.
• 1 set of 5 grinding discs 2.0” (50 mm) in diameter.
•
Integrated grinding preasure detection with a scale at
the upper machine housing.
•
1 set of clamping equipment for mounting the machine
on valves with and without top flange.
•
Start up set of abrasives grain 100 and 500.
•
1 set of 5 CBN grinding disks 2.0” (50 mm) in diameter.
• 1
set of tooling.
•
Carrying cases with foam inlet for the machine and the
accessories.
240-00S-S12 VM2350S with electric motor 230 V / 50 Hz
240-00S-S13 VM2350S with pneumatic motor
240-00S-S14 VM2350S with electric motor 230V / 50 Hz and
pneumatic motor
240-00S-S15 VM2350S with electric motor 115 V / 60 Hz
240-00S-S16 VM2350S with electric motor 115V / 60 Hz and pneu-
matic motor
Globe valve grinding and lapping machine VM2350
Machine like VM2350S but with the following additional
lapping equipment:
•
2 sets (5 discs/set) of lapping disks 1.2” (30 mm) and
2.0” (50 mm).
•
Lapping paste 10 and 30 µm.
240-00S-S02 VM2350 with electric motor 230 V / 50 Hz
240-00S-S03 VM2350 with pneumatic motor
240-00S-S04 VM2350 with electric motor 230V / 50 Hz and
pneumatic motor
240-00S-S05 VM2350 with electric motor 115 V / 60 Hz
240-00S-S06 VM2350 with electric motor 115V / 60 Hz and pneumatic
motor
Pneumatically driven machines also require the accessory pneumatic motor maintenance kit