Climax VM2600 GLOBE VALVE FLAT SEAT GRINDING & LAPPING - Manual (Page 8)

Feb-06 / VM2350-2500-2600 Globe Valve Machine Brochure Page 8 of 8
Accessories
P/N Description
3-jaw centering chuck
•
Clamping dia 80mm ... 430 mm
•
Delivery in a high quality plastic case
300-10S-N01 3-jaw centering chuck (additional to the machine)
-M10 3-jaw centering chuck instead of the universal clamping
device
Extend the P/N by “M10“:
e.g.
240-00S-S05-M10
Grinding adapter
For using the tooling of the VM2000 series machines… on
stationary drill presses. The grinding preasure is made by
an application of springs.
The scale for the grinding preasure is divided into two
ranges: One for high rate of removal of material and the
other for high precision surfaces.
185-00S-S22 Grinding adapter MT2
For using on stationary drill presses with morse taper #2.
185-00S-S23 Grinding adapter MT3
For using on stationary drill presses with morse taper #3.
110-33S-N01 CBN grinding disks 2” (50 mm) diameter. (each)
(A total of 5 required)
Required for rough grinding of heavily damaged seats
(1 set is incIuded in each component package).
110-34S-N01 CBN grinding disks 3.2” (80 mm) diameter. (each)
(A total of 5 required)
Required for rough grinding of heavily damaged seats.
110-41S-N01
Lapping disks 1.2” (30 mm) diameter (each)
(A total of 5 required)
110-42S-N01
Lapping disks 2” (50 mm) diameter (each)
(A total of 5 required)
110-43S-N01 Lapping disks 3.2” (80 mm) diameter (each)
(A total of 5 required)
Because CLIMAX is commited to product improvement, the machine you receive may be slightly different to the pictures above.