Climax VM1200 GATE VALVE GRINDING & LAPPING - Manual (Page 4)

Mrz-06 / VM1150-1200 Gate Valve Grinding & Lapping Machine Brochure.doc
Page 4 of 9
Model VM1150 (Range: 1.25”-6.0” (32 mm-150 mm) Diameter
P/N Description
Gate Valve Grinder VM1150S
Nominal working diameter 1.25“ to 6“ (32 mm to 150 mm)
Submerging depth 16“ (400 mm).
Included Components::
•
7 piece solid grinding disk set 2.0”(50 mm), 2.2”(55
mm), 2.4”(60 mm), 2.6”(65 mm), 2.9” (73 mm), 3.2”(80
mm) and 3.4”(85 mm) diameters.
•
1 set (5) of planet arms 1.2”(30 mm) in length.
•
Set of 2 planet wheels 3.9”(100 mm), 5.3” (135 mm)
diameters.
•
1 set (5) of grinding discs 2.0”(50 mm) diameter.
•
1 set of clamping equipment for mounting the machine
on valves with and without top flange.
•
Start up set of abrasives grain 100 and 500.
•
1 set of tooling.
•
Carrying cases with foam inlet for the machine and the
accessories.
420-00S-S12 VM1150S with electric motor 230 V / 50 Hz
420-00S-S13 VM1150S with pneumatic motor
420-00S-S15 VM1150S with electric motor 115 V / 60 Hz
Gate Valve Grinding and Lapping machine VM1150
Machine like VM1150S but with additional lapping equip-
ment:
•
Set of 3 solid lapping disks 2.2”(55 mm), 2.6”(65 mm),
3.2”(80 mm) diameters
•
2 sets of lapping disks 1.2”(30 mm) and 2.0”(50 mm)
diameters.
•
Lapping paste 10 and 30 µm.
420-00S-S02 VM1150 with electric motor 230 V / 50 Hz
420-00S-S03 VM1150 with pneumatic motor
420-00S-S05 VM1150 with electric motor 115 V / 60 Hz
VM1150S with electric motor VM1150S with pneumatic motor
(standard scope of supply does not include
maintenance unit)