Climax BB8000 PORTABLE LINE BORING MACHINE - Manual (Page 7)

11/06 7
(A) Components, 6" bar
Component Part number
Mechanical axial feed assembly:
6" diameter bar 18556______
Tool carrier assembly:
6" diameter bar 34470______
Bearing support assembly (at least two
recommended):
End-mount self-aligning bearing
support assembly (with spider):
6" diameter bar 21353______
Adapter sleeve for 6" diameter bar:
Required for use with 8" bearing
assemblies 17436______
8" End-mount self-aligning bearing
assembly (without spider):
25074______
8" ID-mount non self-aligning bearing
support assembly (with spider):
23"-2.5" ID 18572______
23"-35" ID 18573______
23"-49.5" ID 18574______
23"-63.5" ID 18575______
23"-77" ID 18576______
8" Non self-aligning bearing assembly
(without spider): 18533______
Boring bar assemblies, 6" diameter bars:
8 ft (2.44 m) 34461______
10 ft (3.05 m) 34462______
12 ft (3.66 m) 34463______
4 ft (4.27 m) 34464______
16 ft (4.88 m) 34465______
18 ft (5.49 m) 34466______
20 ft (6.10 m) 34467______
Tool kit, 6" diameter bar 25515______
(B) Components, 8" bar
Component Part number
Mechanical axial feed assembly:
8" diameter bar 23393______
Tool carrier assembly:
8" diameter bar 34323______
Bearing support assembly (at least two
recommended):
End-mount self-aligning bearing
support assembly (with spider):
8" diameter bar 23550______
8" End-mount self-aligning bearing
assembly (without spider):
25074______
8" ID-mount non self-aligning bearing
support assembly (with spider):
23"-27.5" ID 18572______
23"-35" ID 18573______
23"-49.5" ID 18574______
23"-63.5" ID 18575______
23"-77" ID 18576______
8" Non self-aligning bearing assembly
(without spider): 18533______
Boring bar assemblies, 8" diameter bars:
8 ft (2.44 m) 34305______
10 ft (3.05 m) 34306______
12 ft (3.66 m) 34307______
14 ft (4.27 m) 34308______
16 ft (4.88 m) 34309______
18 ft (5.49 m) 34310______
20 ft (6.10 m) 34311______
Tool kit, 8" diameter bar 17298______
(C) Components, both sizes
Component Part number
Rotational drive assembly: 17299______
Rotational drive collet:
17300______
230V Rotational drive unit: 39067______
Hydraulic motor:
7.3 in 3 25474______
8.9 in 3 25475______
11.3 in 3 25476______
14.3 in 3 25477______
17.9 in 3 25478______
Hydraulic motor fitting kit: 25587______
Hydraulic power unit - 15 hp:
3-Ph/230V/60 Hz 25343______
3-Ph/460V/60 Hz 25344______
3-Ph/550V/50 Hz 25345______
3-Ph/575V/60 Hz 25346______
3-Ph/440V/50 Hz 25347______
3-Ph/220V/50 Hz 25348______
3-Ph/380V/50 Hz 25349______
3-Ph/200V/50 Hz 25350______
Hydraulic power unit - 25 hp:
3-Ph/230V/60 Hz 25408______
3-Ph/460V/60 Hz 25409______
3-Ph/550V/50 Hz 25410______
3-Ph/575V/60 Hz 25411______
3-Ph/440V/50 Hz 25412______
3-Ph/220V/50 Hz 25413______
3-Ph/380V/50 Hz 25414______
3-Ph/200V/50 Hz 25415______
Main disconnect 600V, 3-phase for
15 hp and 25 hp electric powered
hydraulic power units (optional):
-4______
Replacement hydraulic filter element:
25807______
Hydraulic fluid (1 gallon): 14420______
Tool head assembly:
Manual boring head assembly:
16"-18" ID 21135______
16"-20" ID 21136______
16"-22" ID 21137______
16"-24" ID 21138______
16"-26" ID 21139______
16"-28" ID 21140______
16"-30" ID 21141______
16"-40" ID 21142______
16"-50" ID 21143______
16"-60" ID 21144______
16"-70" ID 21145______
16"-80" ID 21146______
Mechanical feed facing head ass'y:
5" stroke 21115______
12" stroke 22359______
Model BB8000 Work Sheet
To build a machine with a 6" diameter bar,
choose components from columns A and C.
To build a machine with an 8" diameter bar,
choose components from columns B and C.
10 11/06
NO. DESCRIPTION NO. DESCRIPTION
15 hp (11.19 kW) hydraulic power
unit
Variable displacement piston pump
power unit with a multifunction
pendant to control: Emergency Stop,
Power Unit On, Power Unit Off, Jog/
Run Selector, and Slow/Fast motor
speed control. Unit comes complete
with a 5 gallon (19 liter) hydraulic
reservoir, 20 foot (6 meter) x 3/4"
hydraulic hoses with quick discon-
nect fittings, and 7/8-14 SAE O-ring
fittings for the hydraulic motor.
Order
motor separately.
If using a generator, check with
your generator manufacturer to
determine required generator size.
25343 3-Phase electric powered hydraulic
power unit 230V, 60 Hz, 1800 rpm
motor. Pumps 20 gpm (75.8 L/min).
Rated at 39.2 full-load amps and 252
locked rotor amps.
25344 3-Phase electric powered hydraulic
power unit 460V, 60 Hz, 1800 rpm
motor. Pumps 20 gpm (75.8 L/min).
Rated at 19.6 full-load amps and 126
locked rotor amps.
25345 3-Phase electric powered hydraulic
power unit 550V, 50 Hz, 1400 rpm
motor. Pumps 16.7 gpm (63.2 L/min).
Rated at 17 full-load amps and 106
locked rotor amps.
25346 3-Phase electric powered hydraulic
power unit 575V, 60 Hz, 1800 rpm
motor. Pumps 20 gpm (75.8 L/min).
Rated at 18 full-load amps and
102 locked rotor amps.
25347 3-Phase electric powered hydraulic
power unit 440V, 50 Hz, 1400 rpm
motor. Pumps 16.7 gpm (63.2 L/min).
Rated at 20 full-load amps and 140
locked rotor amps.
25348 3-Phase electric powered hydraulic
power unit 220V, 50 Hz, 1400 rpm
motor. Pumps 16.7 gpm (63.2 L/min).
Rated at 40 full-load amps and 280
locked rotor amps.
25349 3-Phase electric powered hydraulic
power unit 380V, 50 Hz, 1400 rpm
motor. Pumps 16.7 gpm (63.2 L/min).
Rated at 23.2 full-load amps and
162.1 locked rotor amps.
25350 3-Phase electric powered hydraulic
power unit 200V, 50 Hz, 1400 rpm
motor. Pumps 16.7 gpm (63.2 L/min).
Rated at 44 full-load amps and 308
locked rotor amps.
Mechanical feed facing head as-
sembly
Facing head assembly mounts to
either the 6" or 8" tool carrier. Set the
facing diameter range using spacers
provided. Features mechanical radial
feed with either 5" (127.0 mm) or
12" (304.8 mm) stroke. Feed rate is
adjustable from .003" to .025" (.076
to .635 mm) per revolution.
Requires
6" or 8" tool carrier (P/N 18535 or
18537) and .5" (12 mm) square tool
bits.
21115 Facing head assembly
5" (127.0 mm) stroke
22359 Facing head assembly
12" (304.8 mm) stroke
Boring bar assembly
Chromed bars have a full-length
leadscrew. Bar end caps enable the
axial feed assembly to be mounted to
either end of the bar. Bars are
available in the lengths listed below.
Bars are available in 2-ft (.61-m)
length increments upon special
request. Hardened bars and/or hollow
bars with optical targets are also
available upon special request.
6" (152.5 mm) diameter bars:
34461 Boring bar, 8 ft (2.44 m)
34462 Boring bar, 10 ft (3.05 m)
34463 Boring bar, 12 ft (3.66 m)
34464 Boring bar, 14 ft (4.27 m)
34465 Boring bar, 16 ft (4.88 m)
34466 Boring bar, 18 ft (5.49 m)
34467 Boring bar, 20 ft (6.10 m)
8" (203.2 mm) diameter bars:
34305 Boring bar, 8 ft (2.44 m)
34306 Boring bar, 10 ft (3.05 m)
34307 Boring bar, 12 ft (3.66 m)
34308 Boring bar, 14 ft (4.27 m)
34309 Boring bar, 16 ft (4.88 m)
34310 Boring bar, 18 ft (5.49 m)
34311 Boring bar, 20 ft (6.10 m)
Model BB8000 Components