CEMB USA ER100 - Manual (Page 16)

16
use and maintenance manual Rev. 11-2011
ENGLISH
Wheel lifting
4. wheel lifting
Position the wheel on the carriage resting it against the ZERO WEIGHT carriage lever. Check that the pneumatic ▪
spindle is enabled for mounting (open); if not, push the pneumatic locking pedal.
Push the Zero Weight pedal. ▪
cAuTIoN:
N
eveR push The
Z
eRo
W
eIGhT pedAl If TheRe Is ANyoNe sTANdING IN The RANGe of AcTIoN of The lIfT
.
cAuTIoN:
b
efoRe pushING The pedAl To lIfT A Wheel
,
AlWAys checK ThAT The spINdle Is opeN
(
If NoT
,
The lIfT mIGhT NoT AsceNd oR AsceNd INcoRRecTly
).
As soon as the wheel lifts off the ground, it is ready for mounting on the wheel balancing machine at zero weight.
Position the central hole of the wheel at the height of the spindle and slide the wheel onto the spindle with the aid ▪
of the Zero Weight carriage lever.
Zero Weight carriage lever
Pneumatic locking pedal Zero Weight pedal