CEMB USA ER100 - Manual (Page 56)

56
use and maintenance manual Rev. 11-2011
ENGLISH
8.2.2 General setup 2/3
Decreases the value
Increases the value
Confirms the default parameters
Goes back to the setup screen 1/3
Goes to the setup screen 3/3
Return to main screen
Static unbalace always present: Enables/disables temporary display of the unbalance on the correction planes
selected and the STATIC unbalance
wheel locking: Enables/disables wheel locking in the correction position
wheel runout: Enables/disables wheel eccentricity measurement
rim runout: Enables/disables rim eccentricity measurement
runout diagnosis: Enables/disables display of the runout values on the unbalance measurement
screen
Lift: Enables/disables the lift
printer: Enables/disables the printer
tyre set: Enables/disables the tyre set function
default parameter setting: Resets the default machine settings
Setup