CEMB USA ER100 - Manual (Page 27)

27
use and maintenance manual Rev. 11-2011
ENGLISH
Use of the wheel balancing machine
6.7.3 Change weight application distance
To change the correction positions indicated by the laser and automatically calculated by the machine, operate as
follows:
Position on the side to be changed by pressing the laser positioning button. 1.
Press 2.
Move the wheel by hand to move the laser. 3.
When you have reached the desired position, press the button 4.
To cancel this operation, press the button : The laser automatically goes back to indicating the correction
position previously saved.