1 lock/release wheel in correction position – CEMB USA ER100 User Manual
Page 22
Advertising
22
use and maintenance manual Rev. 11-2011
ENGLISH
when on, it indicates that the wheel locking pedal is pressed
when on, it indicates that the spindle is closed
when on, it indicates that wheel positioning is enabled.
6.4.1 Lock/release wheel in correction position
The wheel balancer automatically keeps the wheel in the correction position on one of the sides. To release it press
.
If the wheel has been released and you need to move it into the correction position again, press
.
Use of the wheel balancing machine
Advertising