CEMB USA ER100 - Manual (Page 41)

41
use and maintenance manual Rev. 11-2011
ENGLISH
6.14 WHEEL ANALYSIS
Press the button from the first set of buttons on the measurement screen.
Goes to the peak/peak and first harmonic graph screen
Goes to the tread analysis screen
Prints the information screen
Return to main screen
This screen shows all the data read in the various unbalance measurement and wheel analysis phases.
For more information, refer to the paragraphs 6.14.1 rUnoUT, 6.14.2 TreaD, 6.14.3 Taper .
the button is displayed with a red I when:
The first harmonic of the wheel runout exceeds the limit set in the setup parameters. ▪
The tread value is less than the limit set in the setup parameters. ▪
The wheel taper value is considered critical (indicator on yellow level) or unacceptable (indicator on red level). ▪
Use of the wheel balancing machine