2 correction mode selection – CEMB USA ER100 (A) User Manual
Page 17
Advertising
![background image](/manuals/326179/17/background.png)
17
Use and Maintenance Manual Rev. 11-2010
ENGLISH
Use of the wheel balancing machine
6.2
CORRECTION MODE SELECTION
Press
from the unbalance measurement screen.
Press the weight symbol in the desired correction position.
If doing the unbalance correction in static mode only, press and hold the inside adhesive weight symbol
for
more than two seconds.
Goes back to the unbalance measurement
screen, automatically recalculating the
unbalance values.
Advertising