CEMB USA ER100 (A) - Manual (Page 9)

9
14
15
Use and Maintenance Manual Rev. 11-2010
ENGLISH
Check that the mains input voltage and frequency 13.
parameters are compatible with the data shown on
the wheel balancing machine plate (±10%) (14).
Check proper pneumatic connection; the machine and 14.
the lift require at least 8 kg/cm² (~ 0.8 MPa; ~8 BAR;
~115 PSI) (15).
Turn on the machine and carry out 15. the following
operations:
Laser calibration ( ▪ manually on board)
Taper calibration ( ▪ manually on board)
Machine calibration ( ▪ manually on board)
Installation