CEMB USA ER100 (A) - Manual (Page 25)

25
Use and Maintenance Manual Rev. 11-2010
ENGLISH
6.8 UNBALANCE SPLIT
Use of the wheel balancing machine
Position the outside unbalance in the correction 1.
position.
Select a spoke close to the position indicated by the
2.
laser and press the button
T HE WHITE LINE ON THE RIM INDICATES THE UNBALANCE
CORRECTION POSITION NOT SPLIT .
I F THE SYMBOL APPEARS , IT MEANS THAT YOU CANNOT
SELECT THE FIRST SPOKE AT THAT POINT
( MAXIMUM DISTANCE 150°).
Turn the wheel in the direction indicated on the screen 3.
and select the second spoke by pressing the button
I F THE SYMBOL APPEARS , IT MEANS THAT YOU CANNOT
SELECT THE SECOND SPOKE AT THAT POINT
( MINIMUM DISTANCE 18°, MAXIMUM DISTANCE 120°).
At this stage, two indications appear on the screen for 4.
positioning of the unbalance correction weights.
To cancel the split, press the button :
Any error in this procedure is clearly shown on screen.
The split function is enabled for the outside of aluminium rims (
ALUMINIUM RIMS
) and is used to hide any adhesive
unbalance correction weights behind the rim spokes.
To split the unbalance measured in two different positions, proceed as follows: