CEMB USA ER100 (A) - Manual (Page 35)

35
Use and Maintenance Manual Rev. 11-2010
ENGLISH
Use the following codes to insert the possible printable values in the balancing certificate.
Field
Generic
#1# Date
#2# Time
Actual unbalances values
#10# Internal unbalance valueP2
#11# External unbalance value
#12# Static unbalance value
Run-out
#20# Radial run-out value
#21# Rim run-out value
#22# Tyre run-out value
#23# Tyre tread depht.
Units
#30# Unbalance unit measure (g/oz)
#31# Run-out unit measure (mm/”)
Tire set
#40# Radial run-out value for wheel nr.1
#41# Tyre tread depht. for wheel nr.1
#42# Internal unbalance value for wheel nr.1
#43# External unbalance value for wheel nr.1
#44# Static unbalance value for wheel nr.1
#45# Radial run-out value for wheel nr.2
#46# Tyre tread depht. for wheel nr.2
#47# Internal unbalance value for wheel nr.2
#48# External unbalance value for wheel nr.2
#49# Static unbalance value for wheel nr.2
#50# Radial run-out value for wheel nr.3
#51# Tyre tread depht. for wheel nr.3
#52# Internal unbalance value for wheel nr.3
#53# External unbalance value for wheel nr.3
#54# Static unbalance value for wheel nr.3
#55# Radial run-out value for wheel nr.4
#56# Tyre tread depht. for wheel nr.4
#57# Internal unbalance value for wheel nr.4
#58# External unbalance value for wheel nr.4
#59# Static unbalance value for wheel nr.4
#60# Radial run-out value for wheel nr.5
#61# Tyre tread depht. for wheel nr.5
#62# Internal unbalance value for wheel nr.5
#63# External unbalance value for wheel nr.5
#64# Static unbalance value for wheel nr.5
Edit the Finalcertificate.htm file based on your needs and save it to the USB key.
Insert the key in the machine and press to reload the customised balancing certificate.
Use of the wheel balancing machine