CEMB USA ER100 (A) - Manual (Page 58)

58
Use and Maintenance Manual Rev. 11-2010
ENGLISH
7.3.5 Wheel runout
Decreases the value
Increases the value
Confirms the default parameters
Goes back to the reserved setup screen
Return to main screen
Wheel first harmonic limit : Represents the first harmonic limit beyond which it is considered appropriate
to turn the tyre on the rim by 180°. Recommended limit = 1.2 mm.
Rim first harmonic limit: Represents the first harmonic limit of the rim below which it is not considered
appropriate to turn the tyre on the rim.
Recommended limit = 0.3 mm.
Minimum correction limit: Represents the minimum correction limit obtainable below which it is not
considered appropriate to turn the tyre on the rim. Recommended limit =
0.8 mm.
Default parameter setting: Resets the default machine settings.
Reserved Setup