CEMB USA ER100 (A) - Manual (Page 22)

22
Use and Maintenance Manual Rev. 11-2010
ENGLISH
Displays the information screen
Selects unbalance display in g/oz
Displays the approximate values
Enables/disables spindle rotation
Unbalance split (not selectable for correction with
clip-on weights)
Displays the second set of buttons
Lift reset with wheel stopped / STOP during spin
WEIGHT APPLICATION POSITION
Correction type Inside Outside
Clip-on weight at 12 o’clock Clip-on weight at 12 o’clock
Clip-on weight at 12 o’clock Adhesive weight at 12 o’clock
Adhesive weight at the point indicated
by the internal laser
Clip-on weight at 12 o’clock
Adhesive weight at the point indicated
by the internal laser
Adhesive weight at 12 o’clock
Adhesive weight at the point indicated by the internal laser
Use of the wheel balancing machine
6.7 UNBALANCE CORRECTION
After an unbalance measurement spin, the weight shadow indicates the correct application point.
6.7.1 Iron rims