ClimaCool SHC onDEMAND 30, 50, 70, 85 Manual - Manual (Page 10)

www.climacoolcorp.com
8
Mounting Rail and Vibration Isolation
ClimaCool recommends locking down the chiller to a concrete base or to three 4” base mounting rails using the six bolt
holes provided in each base pan. Due to the low vibration of the modules, ClimaCool does not require the application of
spring isolators or pads. Should isolators or pads be desired, install in accordance with Figures 4 and 5.
Figure 4 - Spring Vibration Isolators Option
Figure 5 – Vibration Isolation Pads Option
Note: ‹œ‡ƒ†™‡‹‰Š–†‹•–”‹„—–‹‘‹•–‘„‡†‡–‡”‹‡†„›ƒ“—ƒŽ‹Ƥ‡†•–”— –—”ƒŽ‡‰‹‡‡”’‡”‹†‹˜‹†—ƒŽŒ‘„”‡“—‹”‡‡–•Ǥ
4” Rail Minimum
Recommended
(by others)
Spring Vibration
Isolators (by others)
4” Rail Minimum
Recommended
(by others)