Analog Way Tetra-VIO - Manual (Page 11)

TETRA VIO
Chapter 2 : STARTING
2-1. CONNECTIONS
 Turn OFF all of your equipment before connecting.
 Connect the AC power supply cord to the TETRA VIO and to an AC power outlet.
 Connect your computer & video sources to the 3 universal inputs of the TETRA VIO.
- If you need to connect a digital computer source, use the input #2 (DVI-I IN connector).
- Connect your other analog sources to the inputs #1 and AUXILIARY (front panel).
IMPORTANT: Connect only one source by input.
 Connect your SDI or HDSDI video source to the input #3.
 Connect your Hi-Resolution display device (projector, plasma screen...) to the HD15 connector, or connect your video
display device (TV, VCR...) to the mini DIN (S.VIDEO), BNC (composite PAL/NTSC) or HD15 connectors, or
connect your DVI display device to the DVI-I connector, or connect your digital display device to the SD/HD-SDI BNC
connectors.
NOTE: -In SDTV output format, the Composite video, S-VIDEO, YUV/RGSB/RGBS, SDI & DVI signals are
available simultaneously (on respectively BNC, mini DIN, HD15, BNC & DVI connectors).
-In EDTV output format, the YUV/RGSB/RGBS & DVI signals are available simultaneously (on
respectively HD15 & DVI connectors).
-In HDTV output format, the YUV/RGSB/RGBS, SDI & DVI-D YUV/RGB (16-235) signals are available
simultaneously (on respectively HD15, BNC & DVI connectors).
-In Computer output format, the RGBHV/RGBS/RGsB & DVI-D RGB (0-255) signals are available
simultaneously (on respectively HD15 & DVI connectors).
 Turn ON the TETRA VIO (rear panel switch). Then turn ON all your input sources and then your display device.
• TETRA VIO connection diagram:
ANALOG WAY R
5
3 3
3
4
2
6
PAGE 11