Analog Way Tetra-VIO - Manual (Page 16)

Chapter 2 : STARTING (continued) TETRA VIO
2-6. OUTPUT DESCRIPTION
 DVI-I PIN ASSIGNMENT:
This connector can be used with digital signals as well as analog signals. The table hereafter explain the pin
assignment of these connectors.
Pin Function Pin Function Pin Function
1 TMDS Data 2- 9 TMDS Data 1- 17 TMDS Data 0-
2 TMDS Data 2+ 10 TMDS Data 1+ 18 TMDS Data 0+
3 TMDS Data 2 Shield 11 TMDS Data 1 Shield 19 TMDS Data 0 Shield
4 Not used. 12 Not used. 20 Not used.
5 Not used. 13 Not used. 21 Not used.
6 DDC Clock 14 + 5V (Power) 22 TMDS Clock Shield
7 DDC Data 15 Ground for (+5V) 23 TMDS Clock+
8 Analog Vertical Sync. 16 Hot plug detect. 24 TMDS Clock-
C1 Analog Red video (or Cr / Pr)
C2 Analog Green Video (or Y)
C3 Analog Bleu Video (or Cb / Pb)
C4 Analog Horizontal Sync (or composite sync)
C5 Analog Common Ground Return
DDC = Display Data Channel.
TMDS = Transition Minimized Differential Signal.
2-7. AUDIO INPUTS & OUTPUTS
 DESCRIPTION:
Tetra-VIO features 4 Analog Audio Stereo In and 1 Out and also one Digital SPDIF audio In/Out.
It allows embedding Analog and SPDIF Digital Audio stereo signal into SD/HD-SDI with A/V delay compensation.
(Fs: 48kHz – 20/24 bits). It also extracts and outputs SPDIF digital Audio stereo signal from the SD/HD-SDI
embedded stream.
 AUDIO INPUTS:
Each audio input can be assigned to one or several video input.
Rear panel connector:
-IN A: Audio stereo input on 3.5mm jack female connectors.
-IN B: Audio stereo input on 3.5mm jack female connectors.
-IN C: Audio stereo input on 2xRCA (L - R) female connectors.
-SPDIF IN: Digital audio input on RCA female connector.
Front panel connector:
-AUDIO (L - R): Audio stereo input on 2xRCA (L - R) female connectors.
 AUDIO OUTPUTS:
The ANALOG & SPDIF audio outputs are available simultaneously.
-OUT (L - R): Audio stereo output on 2x RCA (L - R) female connectors.
-SPDIF OUT: Digital audio output on RCA female connector.
 AUDIO CONNECTOR DIAGRAM (REAR PANEL):
8 1
9 16
24 17
C1 C2
C3 C4
C5
PAGE 16