Analog Way Tetra-VIO - Manual (Page 32)

Chapter 7 : TECHNICAL SPECIFICATIONS (continued) TETRA VIO
7-3. OUTPUTS
• ANALOG COMPUTER
Connectors: HD15 and DVI-I.
Resolution: Up to 2048x1080 RB (reduced blanking*) -19/10.
Up to 1920x1200 RB (reduced blanking*) -16/10.
Up to 1600x1200 - 4/3.
Sync. types: RGBHV, RGB/S, RGsB (Sync On Green).
Levels: R, G, B = 0.7 Vp/p.
H & V Sync = TTL
Composite Sync = TTL and 0.3 V.
SOG (Sync On Green) = 0.3 V.
Impedance: R, G, B = 75 ohms.
• DIGITAL COMPUTER
Connector: DVI-I.
Format: DVI (RGB or YUV) – 8 bits – 4:4:4 – TMDS –
100 Ω.
Resolution: Up to 2048x1080 RB (reduced blanking) -19/10.
Up to 1920x1200 RB (reduced blanking) -16/10.
Up to 1600x1200 - 4/3
• RGB/S VIDEO (SDTV)
Connectors: HD15 & DVI-I.
Frequency: 15.625 kHz - 50 Hz (625 lines)
15.734 kHz - 60 Hz (525 lines).
Levels: R, G, B: 0.7 Vp/p.
Sync: TTL.
Impedance: RGB: 75 ohms.
• COMPONENT (STDV & EDTV)
Connectors: HD15 and DVI-I.
Frequency: NTSC- 525i @ 60 & 59.94 Hz - 15.734 kHz.
PAL - 625i @ 50 Hz - 15.625 kHz
Progressive NTSC: 31.471 kHz - 60/59.94 Hz.
Progressive PAL: 31.250 kHz - 50 Hz.
Levels: Y: 1 Vp/p,
Cr: 0.7 Vp/p,
Cb: 0.7 Vp/p.
Impedance: Y, Cr , Cb: 75 ohms.
• HD-YUV
Connectors: HD15 and DVI-I.
Formats: 720p, 1035i, 1080i, 1080p & 1080sF.
Levels: Y: 1 Vp/p,
Cr: 0.7 Vp/p,
Cb: 0.7 Vp/p.
Sync.: Tri-level: ±0.3V (positive/negative).
Bi-level: 0.3V (negative).
Impedance: 75 ohms.
*WARNING: The operating of analog display devices in RB (reduced blanking) output format is not guaranteed.
PAGE 32