Analog Way Tetra-VIO - Manual (Page 38)

APPENDIX A / ANNEXE A TETRA VIO
COMMAND RESPONSE
COMMAND DESCRIPTION
TYPE
VALUE /VALEUR
COMMANDE RÉPONSE
DESCRIPTION DE LA COMMANDE MIN MAX DESCRIPTION
IMAGE COMMANDS / COMMANDES DU MENU IMAGE
RK RK Image centering (computer). Rd/Wr 0 1 1 = CENTERING action (automatic reset).
RX RX Horizontal position (computer). Rd/Wr 0 2048
RY RY Vertical position (computer). Rd/Wr 0 2048
RW RW Horizontal size (computer). Rd/Wr 0 4096
RH RH Vertical size (computer). Rd/Wr 0 4096
RP RP Optimize > phase adjust. (computer). Rd/Wr 0 31
RD RD Optimize > clock adjust. (computer). Rd/Wr 200 65535
RI RI Input aspect ratio selection. Rd/Wr 0 3
0 = 4/3 1 = letterbox
2 = 16/9 anamorphic 3 = 16/9.
RA RA Output aspect ratio selection Rd/Wr 0 2
0 = Standard 1 = Full screen
2 = Crop
ZM ZM Zoom mode selection Rd/Wr 0 1 0 = zoom OFF 1 = zoom ON
ZH ZH Zoom horizontal position. Rd/Wr 0 1000
ZV ZV Zoom vertical position. Rd/Wr 0 1000
ZW ZW Zoom horizontal size. Rd/Wr 500 5000 500 = 50% (x0.5)
1000 =100% (no zoom)
5000 = 500% (x5)
ZS ZS Zoom vertical size. Rd/Wr 500 5000
ZT ZT Zoom mode Rd/Wr 0 1 0 = direct 1 = dynamic
RO RO Underscan / overscan (video). Rd/Wr 0 1 0 = underscan 1 = overscan
RT RT
Brightness adjustment (video) or Black
level (computer)
Rd/Wr 0 255
RC RC Contrast adjustment (video). Rd/Wr 0 255
RL RL Color adjustment (video). Rd/Wr 0 255
RE RE Color > Red level (computer). Rd/Wr 0 255
RV RV Color > Green level (computer). Rd/Wr 0 255
RB RB Color > Bleu level (computer). Rd/Wr 0 255
RU RU Hue adjustment (video NTSC). Rd/Wr 0 255
RG RG Gamma adjustment Rd/Wr 5 40
RF RF Anti-flicker level (video output) Rd/Wr 0 7
RS RS Sharpness adjustment (video). Rd/Wr 0 255
Rn Rn 3:2 pull down Rd/Wr 0 1 0 = inactive 1 = active
RN RN 2:2 pull down Rd/Wr 0 1 0 = inactive 1 = active
RR RR Preset image parameters. Rd/Wr 0 1 1 = PRESET action (automatic reset).
AUDIO COMMANDS / COMMANDES DU MENU AUDIO
AP AP Audio input selection for adjustment. Rd/Wr 1 6
0 = No audio source assigned
1 = Input A
2 = Input B
3 = Input C 4 = Input D
5 = SPDIF 6 = Embedded SDI.
Ap Ap Selected audio input for adjustment.. Rd 1 6
AL AL Audio > Input > Level. Rd/Wr 0 47
AB AB Audio > Input > Balance. Rd/Wr 0 90
AE AE Audio > Output > Embedded out Rd/Wr 0 1 1 = Embedded Audio Output
AF AF Audio > Output > Follow SPDIF Rd/Wr 0 1 1 = follow SPDIF Output
AT AT Audio > Output > Mute. Rd/Wr 0 1 0 = MUTE OFF 1 = MUTE ON
AV AV Audio > Output > Master volume. Rd/Wr 0 63
AS AS Audio > Output > Mode. Rd/Wr 0 1 0 = STEREO 1 = MONO
AR AR Audio > Output > SPDIF output rate Rd/Wr 0 4
0 = 32 kHz 1 = 44.1 kHz
2 = 48 kHz 3 = 88.2 kHz
4 = 96 kHz
AO AO Audio > Output > Analog att Rd/Wr 0 127
Ar Ar Audio preset Rd/Wr 0 1 1 = PRESET action (automatic reset).
NOTE: Rd = Read only command / Commande de lecture. Rd/Wr = Read and write command / Commande de lecture et d'écriture.
PAGE 38