Analog Way Tetra-VIO - Manual (Page 27)

TETRA VIO
Chapter 5 : UPDATING THE DEVICE
The TETRA VIO can be updated using a computer (PC) via its RS-232 communication port or via its LAN communication
port.
5-1. UPDATE SOFTWARE INSTALLATION
 Download the Tetra Vio Updater available on our Web site http://www.analogway.com
 Copy the file (eg: TetraVIO_UP_V0201900.exe) onto the computer used for the RS232 and execute it. Then follow
the installation instruction (don’t forget to accept the license agreement).
5-2. DEVICES CONNECTIONS
 Connect the device to an AC power outlet.
 Switch ON the device (REAR PANEL SWITCH = I).
 Connect the device to the computer used for the update via the desired communication port.
• For the RS232 communication port: Connect the RS232 connector of the device to the serial port of your computer
with a DB9 M/F straight cable. Then with the front panel display menu activate the RS232 communication port
(CONTROL > RS232/LAN > RS232).
• For the LAN communication port: Connect the RJ45 connector of the device to your network according to your
installation. Then with the front panel display menu configure the LAN communication port (CONTROL > LAN
setup) and activate the LAN communication port (CONTROL > RS232/LAN > LAN).
5-3. UPDATE INSTRUCTIONS
 Open the file: Tetra VIO Up.exe (in Start > Program > ANALOGWAY > Tetra VIO updater).
 In the Port menu select the Setup then select the Connection type (RS232, UDP or TCP) and select the
communication parameters.
 Click on START on the software. The update will start.
 When the software displays: Program operation completed, click on the Quit button to close the update software.
Your TETRA VIO is now ready to work.
PAGE 27