DE DIETRICH C 310 ECO - C 610 ECO - Manual (Page 6)

6
C 310 ECO - C 610 ECO 02/10/07 - 300015183-001-A
4 Use of the appliance
4.1 Control panel
1. General ON 8 / OFF 7 switch
The control panel should always be switched on to take
advantage of the heating pump anti-sticking function. It is
preferable to use the "summer" mode for the period during which
the heating is to be cut off.
Furthermore, if an interactive remote control (CDI 2) is connected
and the 1 switch is in the off
7 position, there will be no display
on the CDI 2.
2. Access hatch for the settings and programme keys
3. On light / Alarm
- The red resetting button lights up when the burner is in the
safety condition
- The flashing red light signals a sensor error
4. Reset button
5. Timed circuit breaker (4 A)
A second protective function can be found on the safety control card.
4.2 Display
1 Text and numerical display
2 Graphic display bar for the programme in circuit A, B or C
3
Light area: Reduced temperature heating period or tank load
disabled
4
Dark area: Comfort temperature heating period or tank load
enabled
5 Flashing cursor showing the current time
6
Number display (current time, adjusted values, parameters,
etc.)
7
Active programme display, P1, P2, P3, P4
or
E : Summer mode activated
8
The arrows flash when setting values can be modified using
the + and - keys
A bar
9 10 11
8 1
B C
C000142_10
SUNDAY
-04
0 2 4 6 8 10 12 14 16 18 20 22 24
A bar
3 4 5 6 7
9 10 11
8
2
1
B C
SUNDAY
9 Circuit operation symbols
>
Opening the 3-way valve
=
Closing the 3-way valve
:
Displayed circuit pump on
A B C Name of the circuit displayed
10 Symbol displayed above the active operating mode
11
Symbols indicating that the following inputs/outputs are
active
D Burner on
 DHW load pump on
# Summer mode
T Not available