DE DIETRICH INNOVENS PRO MCA 45 - 65 - 90 - 115 - Manual (Page 32)

The current values can be read as follows:
1. Press the two f keys simultaneously. The symbol Q flashes.
2. Confirm using key S. 5t is displayed, alternating with the
current status 3 (for example).
3. Press the [+] key. 5v is displayed, alternating with the current
sub-status 30 (for example).
4. Press the [+] key. t1 is displayed, alternating with the current
flow temperature 60°C (for example).
5. Press the [+] key successively to scroll down the various
parameters. t", t3, t4, t5 .
6. Press the [+] key. 5p is displayed, alternating with the internal
set point 88°C (for example).
7. Press the [+] key. fl is displayed, alternating with the current
ionization current 70 µA (for example).
8. Press the [+] key. Mf is displayed, alternating with the current
fan rotation speed 3000 rpm (for example).
9. Press the [+] key. pr is displayed, alternating with the current
water pressure #0 bar (for example). If no water pressure sensor
is connected, [-.-] appears on the display.
10.Press the [+] key. p; is displayed, alternating with the current
modulation percentage 78 % (for example).
11.Press the [+] key. The readout cycle starts again with 5t.
12.Press the j key 2 times to return to the current operating mode.
5.3 Changing the settings
5.3.1. Parameter descriptions
Parameter Description Adjustment range Factory setting
MCA
45 65 90 115
p1 Maximum outlet temperature 20 to 90 °C 80 80 80 80
p2 Domestic hot water temperature: T
SET
40 to 65 °C 60 60 60 60
p3 Heating / DHW mode Do not modify 1 1 1 1
p4 ECO mode Do not modify 2 2 2 2
p5 Anticipation resistance Do not modify 0 0 0 0
M
"
bar
C0
030
49-
A
 
 
4x
2x
5. Operating the appliance - IniControl MCA 45 - 65 - 90 - 115
31 28/08/12 - 300024828-001-01