Alliance Laundry Systems D355IE1B - Manual (Page 11)

504524 9
Before You Start . . .
Tools
For most installations, the basic tools you will need are:
Exhaust
Use rigid metal duct and exhaust the dryer to the outside
by the shortest route possible.
NOTE: For more detailed information, refer to
Section on Dryer Exhaust Requirements.
Electrical
• ELECTRIC DRYER Dryer needs a 3 or 4 wire 120/
240 or 120/208 Volt, 60 Hertz, AC single Phase
electrical supply.
• GAS DRYER
Dryer needs a 120 Volt,
60 Hertz, polarized 3-slot effectively grounded
receptacle.
NOTE: For more detailed information, refer to
Section on Electrical Requirements.
Gas
Dryer is equipped for Natural Gas with a 3/8" NPT gas
supply connection. For more detailed information, refer
to Section on Gas Requirements.
Location
Place the dryer on a solid floor with an adequate air
supply. For more detailed information, refer to Section on
Location Requirements.
D074IE1F DUCT TAPE TEFLON TAPE
WRENCH
LEVEL
SCREWDRIVERS
D354IE0A