Alliance Laundry Systems D355IE1B - Manual (Page 37)

504524 35
STEP 5:
Set Fabric Selector
Select NORMAL for cottons, PERM PRESS for
permanent press, DELICATE for sensitive items or
FLUFF (NO HEAT) for items that require no heat.
Always follow Manufacturer’s Care Label
instructions.
STEP 6:
Start Dryer
METERED MODELS:
Place coin(s) in slide and carefully push in as far as
possible and then pull slide out as far as possible. After
IN USE light comes on (indicating start of cycle), press
the PUSH-TO-START button.
NONMETERED MODELS:
Rotate timer knob to desired time setting (up to 60
minutes). After IN USE light comes on (indicating start
of cycle), press the PUSH-TO-START button.
Remove knits when slightly damp because overdrying
may cause shinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor
overload protector may have cycled. See page 32.
PERM
PRESS
FLUFF
(NO HEAT)
FABRIC SELECTOR
NORMAL
DELICATE
D342IE2A
D363IE2A
Metered Models
Nonmetered Models
D365IE1A
Nonmetered Models