Lint filter, Motor overload protector – Alliance Laundry Systems D355IE1B User Manual
Page 33
504524
31
Lint Filter . . .
CLEAN THE LINT FILTER BEFORE DRYING EACH
LOAD. (Refer to illustration below for lint filter
location.) Cleaning the lint filter is important because a
layer or pad of lint on the filter will block the flow of air
through the dryer, thus reducing the efficiency of the
dryer. The clothes will take longer to dry and energy will
be wasted.
Motor Overload Protector . . .
The motor overload protector stops the motor and shuts
the heat off automatically in the event of an overload.
After cooling, the overload protector will reset itself. The
dryer can be restarted by pressing the PUSH-TO-START
button. If the overload protector cycles again, remove the
dryer from use and call the service person to correct the
problem.
D349IE3B
LINT
FILTER