Burkert Type 2033 - Manual (Page 21)

21
Option: Hand wheel
Type 2030 Control Funktions A, B, and I and
Type 2012 Control Funktions B and I:
the stop
⑧ is not required.
→
Screw guide spindle ② with spindle extension ① into actuator
(WAF36).
→
Screw lower nut ③ onto guide spindle ②.
→
Position bridge ④ on spindle extension ① and fix with cap screw
⑤ (cap screw M16 x 45, Allan key WAF12). Secure cap screw
⑤ with Loctite 274.
→
Screw upper nut ③ onto guide spindle ②.
→
Set max. and min. stroke by means of upper and lower nuts ③
and lock in each case with second nut ③.
→
Test valve for function and leaktightness
→
Place tube ⑥ onto stroke limitation and screw cover ⑦ by hand
onto guide spindle ②.
9. OPTION: HAND WHEEL
9.1. Actuators D-50 bis H-125
Loctite 274
Parts required
1 Hand wheel
2 Transparent cap
3 Setscrew
3 x without locking paint
2 x with locking paint
4 Pull rod
5 O-ring
6 O-ring
Fig. 9: Actuators D-50 to H-125 with hand wheel
english
Type 2000, 2002, 2012
2030, 2031, 2032, 2033