Actuators k-175, l-225 – Burkert Type 2033 User Manual

Page 27

Advertising
background image

27

Option: Electrical position repeater

10.3. Actuators K-175, L-225

Actuator

Parts required

1 Electrical position repeater

with appliance socket

2 Adapter

3 Spindle cap

Fig. 16: Actuators K-175, L-225 with electrical position repeater

WARNING!

Risk of injury and functional failure due to derailed or slipped
parts!
The actuators contain pre-tensioned springs that may derail or slip
on improper opening.
• Actuators K-175 and L-225 shall only be opened in our factory

or by the responsible distributor.

10.3.1. Work to be carried out before

installation

DANGER!

Hazard due to high pressure!
• Interrupt the control air and fluid infeed before modifying the

devices and reduce the pressure in the fluid system.

→

Interrupt supply of medium

→

Empty valve housing.

→

Bring actuator into the upper piston position.

DANGER!

For control function A and I:
Risk due to high pressure when screwing on the visibility
hood!
The visibility hood must not be pressurized during attachment.
• Therefore pressurize only the lower piston area via the lower

control air connector using compressed air.

→

Unscrew transparent cap from actuator cover.

→

Screw off position indicator (yellow screw cap) by hand

→

Screw spindle cap

③ of the position indicator onto the end of

the spindle (WAF14).

→

Then interrupt supply of control air.

english

Type 2000, 2002, 2012

2030, 2031, 2032, 2033

Advertising
This manual is related to the following products: