Burkert Type 2033 User Manual

Page 22

Advertising
background image

22

Option: Hand wheel

9.1.1. Work to be carried out before

installation

DANGER!

Hazard due to high pressure!
• Interrupt the control air and fluid infeed before modifying the

devices and reduce the pressure in the fluid system.

→

Interrupt supplies of control air and medium.

→

Empty valve housing.

→

Unscrew transparent cap from actuator cover.

→

Screw out position indicator with Allan key (WAF5 or WAF8).

9.1.2. Installation and commissioning

→

Carefully lever the transparent cap

② off the hand wheel ① with

a suitable tool (cap is only pressed on, not threaded)

→

Check: • Setscrew

③ without locking paint (3 pcs.) are loose

• Pull rod

④ is at lower stop

(may be adjusted with Allan key WAF5 or WAF8).

→

Screw hand wheel onto actuator cover, using flats on hand
wheel and counterbracing at valve
max. tightening torques:

D-50, E-63, F-80 = 15 Nm
G-100, H-125 = 20 Nm.

→

Screw pull rod

④ with Allan key (WAF5 or WAF8) onto actuator

and secure with Loctite 274.

NOTE!

Function failure or impairment due to loose screws!
• The screws secured with locking paint shall not be

moved:otherwise perfect functioning will no longer be assured!

→

Securely tighten setscrews

③ without locking paint

(3 pcs, WAF2.5).

→

Test valve for function and leaktightness

→

To open, turn hand wheel

① anticlockwise

NOTE!

Functional failure or impairment due to damaged o-ring

⑤!

• Insert o-ring

⑤ carefully.

• Do not use sharp objects.

→

Push on transparent cap

② with O-ring ⑤.

english

Type 2000, 2002, 2012

2030, 2031; 2032, 2033

Advertising
This manual is related to the following products: