Actuators g-100, h-125 – Burkert Type 2033 User Manual

Page 25

Advertising
background image

25

Option: Electrical position repeater

10.2. Actuators G-100, H-125

Parts required

1 Electrical position repeater

with appliance socket

2 Adapter

3 Threaded sleeve

(only for Types 2030,2031)

Fig. 13: Actuators G-100, H-125 with electrical position repeater

10.2.1. Work to be carried out before

installation

DANGER!

Hazard due to high pressure!
• Interrupt the control air and fluid infeed before modifying the

devices and reduce the pressure in the fluid system.

→

Interrupt supply of medium

→

Empty valve housing.

→

Bring actuator into the upper piston position.

DANGER!

For control function B and I:
Risk due to high pressure when screwing on the visibility
hood!
The visibility hood must not be pressurized during attachment.
• Therefore pressurize only the lower piston area via the lower

control air connector using compressed air.

→

Unscrew transparent cap from actuator cover.

→

Screw off position indicator with Allan key (WAF8).

→

Type 2030, 2031: Screw threaded sleeve

③ onto actuator

spindle (WAF14).

→

Then interrupt supply of control air.

10.2.2. Installation and commissioning

→

Screw adapter

② instead of transparent cap onto actuator

(see “

Fig. 13: Actuators G-100, H-125 with electrical position

repeater”).

→

Screw electrical position repeater

① into adapter ②

(see “

Fig. 13: Actuators G-100, H-125 with electrical position

repeater”).

english

Type 2000, 2002, 2012

2030, 2031, 2032, 2033

Advertising
This manual is related to the following products: