Burkert Type 8691 - Manual (Page 17)

17
Electrical installation
9.2 electrical installation 24 V Dc
9.2.1 electrical installation with cable gland
note!
Breakage of the pneumatic connection pieces due to rota-
tional impact.
▶ When unscrewing and screwing in the body casing, do not hold
the actuator of the process valve but the connection housing.
→
Unscrew the body casing (stainless steel) in a counter-clockwise
direction.
Body casing
Connection housing
Actuator
Fig. 10: Open control head
→
Push the cables through the cable gland.
→
Connect the wires.
IN 1
IN 2
24 V
Valve
+
-
+
-
Jumper:
Color assignment of the Top LEDs
Screw terminals
end positions
Screw terminals
Supply 24 V DC
Screw terminals
Valve (control)
ye gn
To
p
Bot
Bot
To
p
IN 1 = Top (top)
IN 2 = Bot (bottom)
ye gn
To
p
Bot
Bot
To
p
Jumper: assignment p-n-p or n-p-n
outlet (optional)
Fig. 11: Connection with cable gland
english
Type 8691