Burkert Type 8750 - Manual (Page 44)

44
DeviceNet start-up
Typ 8750
name description of the input data
attributes attribute
address class,
instance,
attribute; data
type, length
ERR Error
Indicates the number of the process
value (output) which was not written.
The value is retained until it is deleted
with "1" by acyclically writing the
"Error" attribute (access via Explicit
Message – Set Attribute Single).
HEX
0X14 INP
0X15 SP 100, 1, 1;
USINT, 1 byte
P1 Pressure before the valve in bar 120, 1, 7;
INT, 2 byte
P2 Pressure after the valve in bar 120, 1, 8;
INT, 2 byte
MTMP Medium temperature in °C 120, 1, 9;
INT, 2 byte
PCONact P.CONTROL active 120, 1, 10;
USINT, 1 byte
Tab. 27: Input data attributes; DeviceNet
14.2.2. static output assemblies
name address of data
attribute of the
assemblies for
read access. class,
instance, attributes format of the data
attribute
INP
(factory setting) 4, 21, 3 Byte 0: INP low
Byte 1: INP high
SP 4, 22, 3 Byte 0: SP low
Byte 1: SP high
MTMP 4, 23, 3 Byte 0: MTMP low
Byte 1: MTMP high
SP+MTMP 4, 24, 3 Byte 0: SP low
Byte 1: SP high
Byte 2: MTMP low
Byte 3: MTMP high
MTMP+SP+
ERR+PCON 4, 25, 3 Byte 0: MTMP low
Byte 1: MTMP high
Byte 2: SP low
Byte 3: SP high
Byte 4: ERR
Byte 5: PCON
active
Tab. 28: Static Output Assemblies, DeviceNet
The addresses indicated in “Tab. 28” can be used as a path
statement for the Consumed Connection Path attribute of an I/O
connection.
english