GxT V016-01, Ferret 16 GasLink II 5-Gas Analyzer - Manual (Page 10)

10
Engine Setup
Main Menu Screen
From the Main Menu, use the SELECT buttons to move the arrow
up to Analyzer & Engine Setups then press the NEXT button. The
following screen will appear.
Setup Choices Screen
Use the SELECT buttons to move the selection arrow to Engine
Setup then press the NEXT button. Select EXIT to return to the
Main Menu.
Engine Setup Screen
Use the SELECT button to select which engine setup you wish to
change, then press the NEXT button. Select EXIT to return to the
Main menu. You will be given a choice to save the setup into the
EEPROM for future use. Only one setup is saved at a time.