GxT V016-01, Ferret 16 GasLink II 5-Gas Analyzer - Manual (Page 12)

12
Report Printing
From the Main Menu, use the SELECT buttons to move the selec-
tion arrow to REPORT then press the NEXT button. The following
screen will appear.
Report Screen
Use the SELECT buttons to move the selection arrow to select one
of two report functions, or perform a Visual Inspection. Press NEXT
to begin printing the report. Print Report (All Results) will print the
entire record of recorded data. Print Report (Marked Results) will
print only those data points that you marked during recording and
playback.
Visual Inspection Screen
Use the SELECT buttons to move the arrow to choose one of the
visual inspection sections or quit the program. Use the SELECT
buttons choose the item, then press the NEXT button. Use the
SELECT buttons to select N/A, OK, or BAD. If N/A is selected that
item will not appear on the printout.