GxT V016-01, Ferret 16 GasLink II 5-Gas Analyzer - Manual (Page 8)

8
Analyzer Setups
Analyzer Setup Screen
Use the SELECT buttons to move the selection arrow to Analyzer
Setup then press the NEXT button. The following screen will ap-
pear
Use the SELECT button to select which analyzer setup you wish
to change, then press the NEXT button. Select EXIT to return to
the Setup Choices Screen.
Change the Contrast of the LCD
Use the SELECT buttons to move the select from one of 4 con-
trast levels. Press the NEXT button to return to the Engine Setup
Screen.
Change the Warm-up Time
Use the SELECT buttons to move the select a standard or extended
warm-up. The standard warm-up time is 2 minutes, while the ex-
tended warm-up time is 15 minutes.