Clear-Com Eclipse-Omega - Manual (Page 11)

Clear-Com Communication Systems
Eclipse Matrix Installation Instruction Manual 1 - 1
INSTALLATION
OVERVIEW
INTRODUCTION
The Eclipse Matrix Installation Instruction Manual describes the steps
required to install an Eclipse matrix system and customize it. The
manual provides information about placing, powering, and wiring
components of the Eclipse system.
It is highly recommended that the instruction manual for the matrix to
be installed is read before attempting an installation. That manual
describes the specific Eclipse system hardware and defines many of
the concepts used in the system. An overall understanding of the
system is necessary to make maximum use of its vast capabilities.
Caution: Servicing instructions are for use by qualified personnel only.
To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating
instructions unless qualified to do so. Refer all servicing to
qualified service personnel.
The information in this manual is presented as follows:
Chapter 1. Installation Overview: Step-By-Step Installation Information
The first chapter provides a step-by-step installation guide for the
components of the Eclipse matrix system as received from the factory.
Chapter 2. Placing System Components
The second chapter describes the Eclipse matrix system’s component
location requirements, including a summary of component sizes.
Chapter 3. Powering System Components
The third chapter provides guidelines for providing AC power to the
system and for planning the powering of interface frames.
Chapter 4. Wiring System Components
The fourth chapter gives an overview of the various wiring systems for
connecting panels and interfaces to the matrix. This chapter contains
reference information necessary to wire all connectors in the Eclipse
system. However, many of the components have internal jumpers and
adjustments. Information on internal jumpers, adjustments, and device
specifications can be found in the individual manuals for each
component.
This manual describes how
to install an Eclipse matrix
system.
Each product manual in the
Eclipse set gives additional
installation information.
1